New Cruiser3.0
Active Member
- Joined
- May 26, 2023
- Messages
- 62
- Country Flag
March 2023 passed no issues.When was its last MOT?
March 2023 passed no issues.When was its last MOT?
Make sure its fully warmed up before you check, coolant at 82/83 whatever it is, then try and get a clear pic of that whole screen
Right il try that, It's an automaticI think the coolant is 80 on there? Needs to be 82 or 83 I think.
Pic doesn't need to be perfect just try and get all the numbers in, or take two pics one of each column of numbers - they're all handy to see.
Also make sure engine is idling, everything is turned off (lights. Blower, Aircon, radio). Is it a manual or auto?
I will try the figures tomorrow.Repost the figures as Karl says first.
Not sure that your mechanic understands d4d engines and other closely related items/problems with these engines/ injectors. Its not just the injectors that need considering there are seals and washers. The original washers were the ' wrong' type later changed by Toyota.
Personally I wouldnt be waiting for it to be blowing smoke/hard to start/other problems, while that is happening It may have blow by happening and clogging your oil pickup strainer, then injectors will be the least of your problems.
Are them denso injectors the ones to go for or any complete kits you can buy.Sounds good, don't forget all the other parts injector wise which youbt will need to do at the same time, and make sure you get/are supplied with the right part numbers relating to your cruiser.
Might be obvious, but someone else was given the wrong ones.