Search results

Just saying Hello again, been quite a few years since I had my last one..... And the new (to me) one might not be considered a full Landcruiser, but just got myself an FJ all the way from Japan. Its been a very long and drawn out purchase, especially having to wait nearly 7 weeks for the V5 even...

Hi Having a bit of a shed tidy and have the following for sale if anybody is interested 1 X ARB Recovery strap 5m 12 tonne only used a couple of time in the desert to save a few Land Rovers £40 1 x Damar Tow Strap 4.5m 14 tonne brand new £10 1 x Damar Kinetic 10m 8 tonne strap brand new £10 1 x...

GRP Sand ladders 1200x310 50mm Green Pretty heavy so probably best collected or the famous Landcruiser club distribution network I have never used these, just carried them around the world! Just never got stuck enough:icon-biggrin: £50 for 2 of them

Its with a heavy heart I am putting my 100 Series Cruiser up for sale So , its a 1999 V reg, with 98,000 miles in Silver VX spec I have owned it for 4 years. Prior to my ownership it has a mainly main dealer service history with a couple done by independents, cam belt changed early at 72,000...

just a bit of info really, who is using what? Not sure if there is anything better than MemoryMap

Well it's nice to see, but how come we have nearly 270 people on line?

After a set of 5 18" standard 100 series rims, anybody got any they want to part with? Thanks

Hi, has anybody found a good plastic glue for repairing annoying little broken plastic clips etc Something a little better than super glue? Thanks

Can any body with a 100 series give me a little help I am trying to buy some new wiper blades from Opi oils, they list them as 20" drivers side and 24" passenger side. I have just measured mine and they are 19" but I have always thought they are a little short, autobulds list them as 19" both...

Are you feeling OK, not sick? :lol: Your name has gone 'GREEN' I guess we have a new moderator :clap:

Has anybody done this and through who, it is just for UK use Thanks

So what kind of party are we going to have when we get to 1000 users?

Does any body know if Toyota made split rims for the 100 series http://cgi.ebay.co.uk/5-toyota-landcrui ... _500wt_923 Seen these on the bay, they are 5 stud, but pretty narrow, they might suit 235 85 16 Might be for a 105

Any body ever had a winch bumper powder coated, what sort of money was it? just doing a bit of research at this point

I am sure we have done these before http://www.makerbot.com/ but worth another look, awsome

Found this the other day, makes reasonably interesting reading http://www.fourwheeler.com/techarticles ... index.html didn't test everything but the Hankook's come out as winners on their scale

Does anybody have experience of them, I know they are difficult to find, but are they worth hunting for :roll: Also I am pretty sure I will need to find some 7" wide rims for them or perhaps 6.5 steel rims, does anybody know what the standard offset is for the 100 series rims is? I also...

Just saw this on the Devon 4x4 site A new general Grabber AT tyre I guess this what they are doing about the pending Euro tyre law, looks like there will be a decent size range eventually I guess there might be a few new designs in the near future

Gav, I read that you have bought some 315x75x16 Cooper STT, any chance you could get me some rough measurements for height, tread width and total tyre width for me Thanks chap Oh yes any chance of a few pics?

Oh these look nice :clap: http://www.facebook.com/pages/RCV-PERFO ... 7588760617 Think they might be a bit on the expensive side

Just had a thought, my 100 series has 2 reading lights in the overhead console. Now with all these led bulbs about has anybody thought of putting red bulbs in them, to help with night vision?

OK Crispin and I are putting together a bit of fun for Christmas :D We are going to run a Night Road Rally on the Plain on December 11th, now for people how haven't done one of these before it is mostly about Nav and maintaining an average speed over a distance. We are going to include a bit of...

Was thinking on the way home today, maybe we could do the plain a little differently. Not withstanding the picture already posted about today's visit suggesting we can't navigate, does anybody want to drive the Plain at NIGHT to make it a bit more difficult? This is just a suggestion not sure...

Happy Birthday Steve (Black Widow), hope you have had a good day :D

Saw this posted on the SA forum, not sure you all will have seen it, its from an Australian 4x4 magazine Basically it is a comparison of 31"-33"-35" on a single vehicle to see the difference in approach, ramp and departure angle plus power loss Tyre......Approach...Departure...Ramp-over....Diff...

Having read the post in the 80 section about pin 7 mod, I thought I should post my findings on the 100 series If you do the lo-sensor mod on a 98-2000 100 series diesel, you loose the ability to lock the center diff, this in turn means you can't lock the rear diff Pin 7 would seem the only way...

Ok, I have tried a search, couldn't find anything I want some jump leads to put in the 'come in handy' bag in the back of the truck, what should I buy?

Looks like its the one we all wanted to see tonight starting now Cape Town to Cairo

Has anybody any experience of these people http://www.adonistechnology.com/index20 ... s=produits I was looking at the 100 series stuff, but they do plenty of stuff for other trucks. They are very expensive, but the RAID version for my truck would be up to about 275cv and a whole bunch of torque...

Happy Birthday, Ian

Do you know what nonsense this is? Jon mentioned some time back that Camskill didn't want to sell him some tyres a while back, do we think we won't be able to buy mud tyres in the not to distant future? Is this why BF Goodrich changed the Mud Terrain, I recently read that the BF Goodrich KM2 is...

Just an idea, how about brightening up the forum backgrounds with some images, or maybe the header across the top. Perhaps they could be up for a one or two months then changed?

Found this on the Nene Overland site, looks a bit serious, crazy

XEng Xlights Has anybody got any or used any? What did you think of them?

Why do we have the option of hidden status?

I know Lincomb 2 planning is underway Does any body fancy trying the Plain, perhaps with out so much mud and a little more dust? :D {Pedantic admin edit - changed to a "plain" rather than an aircraft}

I do think it is kind of ironic that since all the tyre threads have been moved here, it has been all quiet on the western front So a question, has anybody got any experience with the Simex Jungle Trekker? I know Dr Jon uses the Extreme Trekker, but has anybody tried the JT

Trying to get hold of one of the tow hooks and bolts from the front of a 100 series, anybody got one spare?

Has any body ever seen these before, I have found the part numbers on ToyoDiy, they are a factory part

Good job on the tyre forum, perhaps the other tyre threads could be moved across

So feeling inspired by Kevin's have a go attitude (well done Chap) What welder should I buy for making sliders etc? I am a complete novice so be gentle please? Had a look at www.mig-welding.co.uk, but feeling a little out of my depth

So whats your favorite? I have looked in my hand book and it says I can use either 5w -30 for -29deg C to 8deg C, 10w -30 for -18 deg C to 38deg C+, 15w -40 for -10deg C to 38deg C+, I can't see it getting colder than -10 and I can see it getting warmer than 8deg C I should be looking at the 2...

My Batteries are dying and need to be replaced shortly As my future plans might involve putting a winch on the front, I am thinking of using this opportunity to up spec the batteries in preparation. What would you chaps with winches recommend? should I stick with standard Varta type and have a...

Just some random pics, to smooth the afternoon along Helping out

Well after Salisbury and an over-enthusiastic Polish guy with a steam cleaner I have some condensation in my headlights I have planned to remove the lights rinse them, but what is the best way to dry them, oven for 20 minutes at gas mark 2? :lol:

As much fun as Salisbury Plain is, where next? Is there any other places like it that might be worth an explore? Maybe a bit easier for other people from further north to get to? Just an idea

Hi, Any advice please I am having a bit of trouble getting the cir-clips back on the drive shafts at the front of the stub axles, it feels as if the drive shaft is not coming through the steering knuckle enough, any body got any suggestions? Thanks

Friday again Bendy Cruiser Algeria (mind the mine fields) Sun going down

So what do you all think Where do we stand with winch bumpers with bar work, are they legal? I see TBR are selling them again, but Devon 4x4 don't seem to be. I spoke to OEC and they suggested 'no go' I have also seen on http://www.tjmproducts.ch/ They are selling a range of euro bumpers, they...

Different kind of car, but still fun Nurburgring 24hr 2008